Go to the following link to download the pdf file. It discribes what to do depending on the model you have. the pics are all the way at the end. Hope this helps.
http://www.dunhill.com/en-cn/pages/produ…|||plez read it befor doing and i am not responsibal for any injury
Do not refill lighter
immediately after use. Allow
time for lighter to cool off.
Set flame height adjuster to
minimum. Using a small
screwdriver turn the adjusting
screw clockwise to tighten the
gas valve (some models have
adjustable wheel).
Hold lighter away from face
and clothing. With a screw
driver push in the refilling
valve to let out the air from
inside the fuel tank. Air in the
fuel tank will prevent butane
gas from being injected and
causes the lighter to
malfunction.
Always refill lighter in an
upside down position, as
shown in the picture.
Shake the butane refill gas
can, press the stem of the
refill can into the refill valve of
the lighter. Fill gas into the
lighter for 5 seconds. You may
repeat, for shorter period of
time.
Allow 3-4 minutes for gas and
lighter components to reach
room temperature.
Turn the flame adjuster slowly
counter clockwise to reach the
desired flame height.|||You don't -- butane lighters are not made to be refilled. They're made to be replaced.
Subscribe to:
Post Comments (Atom)
Did you know that you can shorten your links with LinkShrink and make dollars from every visit to your shortened urls.
ReplyDelete